Previous update: https://steemit.com/blog/@lostgeneration/project-vehicle-update-9
So I have been sick and essentially bedridden for 2 weeks, but today I willed myself to the shop to work on something. Instead of working in the colder and harder to heat shop, I decided to work on something in the insulated building. So I began the process of checking and rebuilding the transfer case of the Blazer. The transfer case is what enables 4 wheel drive and range selection of 2 high, 4 high, 4 low, etc. A mechanism activates via lever to select range, which connects or disconnects the front drive shaft output to the rear drive shaft output. This is done with a drive gear, driven gear, and chain.
NP-208 transfer case.
Rear retainer removed.
Rear case removed.
Drive gears and chain removed.
Fully disassembled.
Planetary assembly.
Stay tuned for future updates.
Congratulations @lostgeneration! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :
Click here to view your Board
If you no longer want to receive notifications, reply to this comment with the word
STOP