Thats a 10mm three flute carbide end mill at 10.000rpm and 3800mm/min feed rate, the depth is 12.5mm and width 2.5mm
You are viewing a single comment's thread from:
Thats a 10mm three flute carbide end mill at 10.000rpm and 3800mm/min feed rate, the depth is 12.5mm and width 2.5mm
Thank you for answer. It would be fun to try that kind of milling. I think it removes material most efficiently. Working on bigger machine that has max rpm 6000 and table feed drops really low on tight turns so it is impossible to even try it.
it works great on small machines like my Haas to remove quickly a lot of material