Here is a quick update on the Destiny 2 Hunter Knife project.
This last week I was able to finish up the clay step for my two part mold. This involved putting everything to a smooth finish on the clay, putting everything at a 90 degree angle where there clay meets the prop. After that I put up the mold walls using some foam core and hot glue. Then I made the clay meet the foam core wall at a 90 degree angle. Finally I put in some registration marks into the clay that will help the two parts of the mold match up better when everything is done.
I have ordered up some mold max 30 silicone rubber to make the mold. Then I am meeting up with a friend to get a vacuum tank to suck the air out of the liquid silicone this will have the mold be the best possible finish. Once I do that I will let the first 1/2 of it cure for a day. Then I will carefully pull all of the clay off, spray some mold release, and then pout the second 1/2 of the mold. Hopefully will get those steps done sometimes next week. :)
Congratulations @frogmancosplay! You received a personal award!
You can view your badges on your Steem Board and compare to others on the Steem Ranking
Do not miss the last post from @steemitboard:
Vote for @Steemitboard as a witness to get one more award and increased upvotes!
Congratulations @frogmancosplay! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :
Your next target is to reach 50 replies.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPSupport the HiveBuzz project. Vote for our proposal!