Follow me/ up vote if you think this information was helpful.
Hello all, just wanted to share some ideas and things I learned in the process of building my first GPU miner.
Basic home items needed.
1- Standard ATX computer case (remove side panel) we will be placing the case on its back side to mount the gpu base.
Example: I removed front cover and one side panel.
2- Install motherboard,psu,cpu/fan,sdd/hdd/, (make sure too connect all the gpu /motherboard cables to the psu before installing the psu inside the case) it will save you time.
3-For mounting the gpu risers I used a thin but durable pinewood board measure it to the width of the case. (Drill mounting holes)
GPU base^^drill holes for the gpu risers.
(notice 2 holes near each other where the gpu risers will go 1 hole to loop through a twist tie) I only tied down 3 sides per riser as I ran out of twist ties.
4- Mounting gpu risers with twist ties (Super easy)
Twist tie's (use simple string if you have too)
5- Mount the GPU base board on the computer case you can use twist ties to hold the gpu base board to the case so it wont slide off.
If you are getting into mining and need help or ideas or just need some info feel free to contact me. I will be more than happy to help fellow steemit readers.
Click up vote if you found this blog helpful Thank you!
Nice little DIY setup you got there. Hope your mining is turning out great. What type of GPUs are those?
I got 3 gtx 1070 and 1 gtx 1080 on this rig hoping to get some more card by blackfriday. Currently mining ethereum getting 33Mh's on the 1070 and about 28Mh's with the 1080. planning on replacing the ethereum rig with only 1070's for more output with less watts.
Congratulations @tronekz! You have completed some achievement on Steemit and have been rewarded with new badge(s) :
Click on any badge to view your own Board of Honor on SteemitBoard.
For more information about SteemitBoard, click here
If you no longer want to receive notifications, reply to this comment with the word
STOP