Ah I should have found that for the post, thanks for bringing it up. It looks to be the 1-ohm (1R00) resistor on the middle right with the poor solder job, as this could straight through the trace for the high current port. However I could be wrong, as I was expecting a lower value.
Ah I should have found that for the post, thanks for bringing it up. It looks to be the 1-ohm (1R00) resistor on the middle right with the poor solder job, as this could straight through the trace for the high current port. However I could be wrong, as I was expecting a lower value.
Next, will we analyze the oscilloscope?