Greetings to readers of my blog! Today I will tell you how to make inductance with the necessary parameters. In my case it was a toroidal coil that should work in my power supply. First I found a copper wire, which I removed from the old transformer.
The wire has a diameter of 0.66 mm. This I measured with a digital caliper.
Further, to get the inductance, it must be done on the ferrite ring. I found this from some disassembled device. Then I measured the ferrite ring, I needed an outer diameter, inner diameter and height.
To calculate the usable inductance, I used an excellent online calculator. I entered the measured parameters to get 20 microhenry (μH).
Thus, the length of the wire was 58 cm, and the number of turns 17. I neatly wrapped the wire on the ring.
It seems to be not bad, do you think? To measure the resulting inductance, I used some tester.
As you can see, I got 0.02mH * 1000 = 20μH. This magic works :)
Note that in this calculator there are other calculations, for other inductances on ferrite rods or air coils.
Thank you for your attention, I hope my information be useful.
With the best wishes, @gleb-jeglov aka Evgeny.
Для чего это может понадобиться?
Я делал LC-фильтр для блока питания. В целом же, такие катушки могут служить для разных целей, различные фильтры, преобразователи, контуры. Иногда проще самому сделать индуктивность, чем ждать пока придет готовая с али :)
Уважаю людей, которые могут смастерить полезную вещь из ничего!
Спасибо :)
why not use the steemstem tag... They curate science and technlogical posts like this.
Thank you! I did not know about it, maybe it's because I'm not so long ago on this site.
Hello gleb-jeglov, I am a simple vote scheduling service for randowhale so that you can always catch it awake and get an upvote from them. For a full description of how to use me, check out my guide post.
Is it possible to make small transformer using a ferrite ring like this?
No, this is not suitable for voltage conversion as a transformer.
Greetings! I am a minnow exclusive bot that gives a 5X upvote! I recommend this amazing guide on how to be a steemit rockstar! I was made by @EarthNation to make Steemit easier and more rewarding for minnows.
You got a 0.72% upvote from @mercurybot courtesy of @gleb-jeglov!
This post has received a 25.00 % upvote from @voterunner thanks to: @gleb-jeglov. BIG NEWS: Build your passive income with daily payouts from @voterunner! Read more about earning SBD with me. Daily. The easy way!
Congratulations! This post has been upvoted from the communal account, @minnowsupport, by gleb-jeglov from the Minnow Support Project. It's a witness project run by aggroed, ausbitbank, teamsteem, theprophet0, someguy123, neoxian, followbtcnews, and netuoso. The goal is to help Steemit grow by supporting Minnows. Please find us at the Peace, Abundance, and Liberty Network (PALnet) Discord Channel. It's a completely public and open space to all members of the Steemit community who voluntarily choose to be there.
If you would like to delegate to the Minnow Support Project you can do so by clicking on the following links: 50SP, 100SP, 250SP, 500SP, 1000SP, 5000SP.
Be sure to leave at least 50SP undelegated on your account.