Bore Pile

in #engineering7 years ago

Greetings, how are you steemit friends? Hopefully still the spirit always.

Bore pile is the same as the precast stakes, the difference is only in the manufacture technique, where the precast stakes are printed first, while the bore pile begins with soil drilling.

The foundation itself serves to hold a continuous load from a building up into a hard soil layer. For that foundation must be calculated apat guarantee the stability of the building to its own load (dead load), live loads that work like earthquakes, wind pressure resulting in a decrease of a particular foundation.

Bore pile foundation is the foundation of tubular pole
which is made in the soil surface by drilling the soil until the depth has been determined from the test results sondir then inserted steel reinforcement that has been assembled then casting the place by inserting the concrete.

This type of foundation is used in a heavy-duty building construction such as high rise buildings, towers, bridges and others. if the ground condition essentially does not have sufficient carrying capacity to retain the structure of the building.


Deep hole drilling



Rebaring


Rebaring


Pouring


Curing


The foundation after the soil was excavated

best regards,
@rahmadi