Hand tools are a necessity in our daily life, whether it is for household tasks or automobile repairs. They are used to fix a broken pipe, hang pictures on the wall, change a car tyre, or to assemble furniture. From hammers to pliers to wrenches to shovels to spades, each tool serves a different kind of purpose. When a tool is used in a way that’s different than its intended purpose, it is known as a tool hack.
All leading hand tools manufacturers in India offer a wide range of general purpose tools to suit different requirements. But when you’re in the middle of a job, the right tool may not always be handy. In such situations, a tool hack can be the most effective solution.
Some of the most helpful tool hacks are:
Bobby Pin Nail Holder
We have all had that one experience when holding the nail in place has resulted in being hammered on our fingers. Well, not anymore! A common bobby pin makes a great nail holder. Place the nail in a bobby pin and position it on the wall. Once the nail is started, remove the bobby pin and continue hammering away. This way, your fingers are kept at a safe distance.
Vise-Grips to Pull Nails
Pulling nails out of a hard surface can sometimes be really difficult. Locking pliers, also known as vise-grips, can serve as excellent nail pullers. Hand tools manufactures in India design the locking pliers to be locked into a position, using an over-center toggle action. When vise-grip pliers are used to pull nails, it locks onto the nail, creating a secure hold, and the curve of the head provides excellent leverage. To ensure the surface is not damaged, placing a putty knife under the pliers is advisable.
Hack for Polished Shovel
The shovel is a garden tool mainly used for digging in the soil. From wet earth to hardened soil, it is used on all surfaces. Digging around the soil can make shovels look dirty real fast. A simple hack to avoid this is to spray the tool with silicone. The light coating will prevent dirt from sticking, and keeps your tool gleaming like new for long time.
Mix Concrete with a Rake
When it comes to mixing concrete, a sturdy hoe is one of the must-have tools. Next time, try using a garden rake for this job. Hand tools manufactures in India make a rake with solid forks sticking out from the edge of the blade, designed to break up the soil. For mixing concrete, the rake won’t splash as much water over the edge, and the fork tines do a good job of combining the water with the powder. With a hoe, lot of time is wasted in just pushing around the powder around the tub.
Save your Back with Ironing Board
When fixing pipes in a kitchen, one often has to lie down on the floor to better access the pipes underneath. This can be really uncomfortable, especially when the sharp cabinet edge cuts into your shoulder blades. An ironing board proves to be really helpful at such times. Set one end of the board inside the cabinet and support the other end with a scrap piece of wood for better balance. Lying on the ironing board will be easier on your back.
Easy to Read Markings
Many hand tools manufacturers in India use stamped-in markings on their tools, which can be tough to read. One easy solution is to take some white nail polish and brush it on the tool, and then quickly wipe it with a clean cloth. The white polish stays in the grooves, and the numbers are easy to read at a glance. You can use a lacquer thinner to ensure the polish stays for long.
Hack for Hands-Free Light
When working in low light conditions, everyone wishes for a hands-free lighting tool. Now you can make a hands-free light of your own with just a flashlight, a pair of pliers and a rubber band. Place the flashlight in the jaws of the pliers, and then wrap a rubber band around the handles to lock the position. And you’re done! Point the hands-free light wherever you need it.