Hola Comunidad Colmena. Feliz inicio de semana. Un saludo afectuoso a todos. Hoy le presento unas de mis creaciones "Cotillon o souveniers" con materiales reciclados. El paso a paso.
Hello Hive Community. Happy start of the week. An affectionate greeting to all. Today I present some of my creations "Cotillon or souveniers" with recycled materials.Step by step.
MATERIALES:
CARTULINA RECICLADA. ( 1 HOJA )
CARTULINA DOBLE FAX. ( 2 tiras de 21.5cm de largo.)
PEGA SILICONA LIQUIDA.
PINTURA AL FRIO NEGRA.
TIJERAS DE CORTE DE FIGURAS.
TIJERAS NORMAL.
ESCUADRA.
PINCEL.
PITILLO PLASTICO (recortado por la mitad.)
PAPEL DE ENVOLTURA DE CAUCHOS DE BICICLETAS.
FIGURITAS RECORTABLE DE REVISTAS VIEJAS.
CARPETA DETERIORADA O USADA.
MATERIALS: RECYCLED CARDBOARD. (1 SHEET) DOUBLE FAX CARDBOARD. (2 strips of 21.5cm long.) GLUE SILICONE LIQUID. BLACK COLD PAINT. FIGURE CUTTING SCISSORS. NORMAL SCISSORS. SQUAD. BRUSH. PLASTIC SKIN (cut in half.) BICYCLE RUBBER WRAPPING PAPER. CUT OUT FIGURES FROM OLD MAGAZINES. DETERIORATED OR USED FOLDER.
PASO 1:
Se recorta un rectangulo de la cartulina reciclada de 21.5 cm de largo X 8cm de ancho, y se recorta la orilla con las tijeras de figuras.
A rectangle is cut out of the recycled cardboard measuring 21.5 cm long X 8 cm wide, and the edge is cut out with the figure scissors.
PASO 2:
Se recortan dos tiras de la cartulina doble fax con las tijeras de figuras onduladas, de 21.5 cm de largo X 2 cm de ancho.
Cut two strips from the double fax card with the wavy shape scissors, 21.5 cm long X 2 cm wide.
PASO 3 :
Se pegan con la silicona liquida las tiras de cartulinas. Luego se cierran los laterales con la pega. Se pintan lunares con la pintura al frio (u otra pintura que deseen). Con la punta del pincel.
The cardboard strips are glued with the liquid silicone. Then the sides are closed with the glue. Polka dots are painted with cold paint (or other paint of their choice). With the tip of the brush
PASO 4:
Se recorta un circulo de 9.5cm de diametro de la cartulina reciclada. Luego se salpica el pincel con la pintura negra y se pega a la base antes descrita.
A 9.5cm diameter circle is cut out of the recycled cardboard. Then the brush is sprinkled with the black paint and it is glued to the base described above
PASO 5:
Se recorta una figurita de la revista sin uso. Se pega en una base de una carpeta deteriorada. Ya pegada la figura se le coloca y se pega en la parte trasera el pitillo cortado por la mitad.
A figurine is cut out of the unused magazine. It sticks to the base of a deteriorated folder. Once the figure is glued, the cigarette cut in half is placed on it and glued on the back.
PASO 6:
Para finalizar se pega la figura por la parte dentro del cono, y se rellena con el papel de envoltura de los cauchos de bicicleta o motocicleta. Luego se le cortan tiritas de cartulina y se enrrolla alrededor del lapiz para darle forma de espiral y asi culminar esta manualidad. Espero y les guste.
Finally, the figure is glued on the inside of the cone, and it is filled with the wrapping paper of the bicycle or motorcycle tires. Then cardboard strips are cut and rolled around the pencil to give it a spiral shape and thus complete this craft. I hope you like it.
Congratulations @hamilet29! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :
Your next target is to reach 50 upvotes.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPCheck out the last post from @hivebuzz:
Support the HiveBuzz project. Vote for our proposal!
this is the final product. I hope and you like it. Thank you for visiting my blog