[ESP-ENG] Lindo y sencillo porta lapices. || Nice and simple pencil holder.

in Hive Diylast year

Portada.png

Saludos a mi gente creativa de hive diy, el día de hoy les traigo un lindo y sencillo porta lapices, muy útil para cualquier persona al momento de utilizar los lapices o material de trabajo y estudio, así tendremos todo organizado en un solo sitio. Hecho con material de provecho y es muy fácil de hacer.

Greetings to my creative people of hive diy, today I bring you a nice and simple pencil holder, very useful for anyone when using the pencils or work and study material, so we will have everything organized in one place. Made with useful material and it is very easy to make.


MATERIALES.jpg

Español:

Materiales:

  • 3 tubos de cartón del papel higiénico.
  • 1 pedazo de cartón.
  • 1 hoja de revista.
  • Retazo de foami escarchado color verde, azul, negro y naranjado.
  • 1 hoja de papel blanca.
  • Siilicon.
  • Tijera.
  • Lápiz.
  • Regla.

English:

Materials:

  • 3 tubos de cartón del papel higiénico.
  • 1 pedazo de cartón.
  • 1 hoja de revista.
  • Retazo de foami escarchado color verde, azul, negro y naranjado.
  • 1 hoja de papel blanca.
  • Siilicon.
  • Tijera.
  • Lápiz.
  • Regla.

Separador.png

Paso1.png

Español:

Paso 1:

  • Dibujo y recorto, 1 circulo de 14 cm de diámetro en el cartón y en una hoja de revista, luego pego con el silicon los dos círculos juntos, uno debajo del otro, después marco con el lápiz los tubos de cartón a la medida de 6cm de altura, 7 1/2 , y 9 1/2, ahora procedo a recortar por la marca indicada.

English:

Step 1:

  • I draw and cut out 1 circle of 14 cm in diameter on the cardboard and on a magazine sheet, then I glue with the silicone the two circles together, one below the other, then I mark with the pencil the cardboard tubes to the measure of 6cm in height, 7 1/2, and 9 1/2, now I proceed to cut out by the indicated mark.

Separador.png

Paso2.png

Español:

Paso 2:

  • Teniendo los 3 tubos de cartón recortados, marco y recorto en la hoja de papel blanca 3 rectángulos a la medida de la altura de los tubos de cartón por 16 cm cada uno, luego procedo a forrar los tubos con los rectángulos de papel, recorto 3 tiras de foami verde de 1 cm de ancho y lo pego con silicon caliente en el borde de arriba.

English:

Step 2:

  • Having the 3 cardboard tubes cut out, I mark and cut on the white paper sheet 3 rectangles to the measure of the height of the cardboard tubes by 16 cm each, then I proceed to line the tubes with the paper rectangles, cut 3 strips of green foami 1 cm wide and glue it with hot silicone on the top edge.

Separador.png

Paso3.png

Español:

Paso 3:

  • Luego pegamos los tubos de cartón en el centro de la base del porta lapices, después recortamos varios triángulos de foami negro, azul y naranjado; comienzo a pegarlo por todo el alrededor de los tubos de cartón, y así darle un diseño colorido a nuestro porta lapices.

English:

Step 3:

  • Then we glue the cardboard tubes in the center of the base of the pencil holder, then we cut out several triangles of black, blue and orange foami; I start gluing them all around the cardboard tubes, and thus give a colorful design to our pencil holder.

Separador.png

Resultado final, muchos saludos nos vemos en el próximo blog.

Final result, best regards and see you in the next blog.

R1.jpg

R2.jpg

R3.jpg

R4.jpg


Todas las fotos son de mi autoria y editadas con Canva.

Traductor: DeepL Traslate.

All photos are my own and edited with Canva. Translator: DeepL Traslate.


erur4ur5u.jpg

Sort:  


The rewards earned on this comment will go directly to the people( @ramisey ) sharing the post on Twitter as long as they are registered with @poshtoken. Sign up at https://hiveposh.com.

Gracias por el apoyo.

posh

~~~ embed:1651372611811655682?t=KphlHk_C_HTMdGkXQXGLGw&s=19 twitter metadata:bWl1cmllbDIwMTV8fGh0dHBzOi8vdHdpdHRlci5jb20vbWl1cmllbDIwMTUvc3RhdHVzLzE2NTEzNzI2MTE4MTE2NTU2ODJ8 ~~~

Congratulations @brahiam15! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You received more than 6000 upvotes.
Your next target is to reach 7000 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Check out our last posts:

Hive Power Up Day - May 1st 2023
The Hive Gamification Proposal
Support the HiveBuzz project. Vote for our proposal!

Thank you very much.

You're making a big impact @brahiam15! Keep up the fantastic work and you'll reach your Hive target in no time.

Thank you for using the #diy tag.

As long as you keep growing your BUIDL POWER you will receive my support.

Upvoted.

Check out this post for more information about BUIDL tokens.

Thank you.

This is what we address as simple in gorgeous. Well done.