UNA PIÑATA DIFERENTE. Piñata de pozo de los deseos

in Hive Diy2 years ago

Tuve la oportunidad de hacer una piñata diferente, Un Pozo de los Deseos!!

En el momento que me hicieron el encargo me entro un poco de preocupación, aunque es una forma bastante básica, nunca había hecho algo parecido.

Sin embargo ya me habían pagado y ya estaba montada en el autobús, tenía que hacerla y quiero compartir con ustedes como fue el proceso.

I had the opportunity to make a different kind of piñata, a Wishing Well!

The moment I got the order I was a little worried, even though it is a pretty basic shape, I had never done anything like this before.

However, I had already been paid and was already on the bus, I had to make it and I want to share with you how the process went.

Lo primero fue realizar un cilindro de cartón, para esto recortamos un rectángulo de 1mt de largo y 60 cm de alto; en este rectángulo marcamos en los extremos superior e inferior una pestaña de 1cm a todo lo largo del mismo.

The first thing was to make a cardboard cylinder, for this we cut a rectangle of 1mt long and 60 cm high; in this rectangle we marked at the top and bottom ends a 1cm flange along the entire length of it.

InShot_20220612_140551303_exported_433.jpg

Recortamos dos círculos de cartón y comenzamos a pegar las pestañas del rectángulo, alrededor de cada círculo.

Como se trata de una piñata, decidí reforzarlo bastante en la parte interna para que no la rompan tan fácil.

We cut out two cardboard circles and started gluing the tabs of the rectangle around each circle.

Since this is a piñata, I decided to reinforce it quite a bit on the inside so that it won't break so easily.

InShot_20220612_140551303_exported_7699.jpg

InShot_20220612_140551303_exported_9833~2.jpg

Una vez armado nuestro cilindro, lo coloque sobre una base de cartón duro que será el piso del pozo.

Para realizar los troncos, utilice 3 tubos de cartón, y los pegue bien a cado lado del pozo y arriba.

Once our cylinder is assembled, place it on a hard cardboard base that will be the floor of the well.

To make the trunks, use 3 cardboard tubes, and glue them well on each side of the well and above in the form of an arch.

InShot_20220612_140551303_exported_12499~2.jpg

InShot_20220612_140551303_exported_19199~2.jpg

InShot_20220612_140551303_exported_16866~2.jpg

Finalmente lo forre todo con papel, agua y pega para que todo se vea unificado y también tenga un refuerzo extra

Finally, line it all with paper, water and glue so that everything looks unified and also has an extra reinforcement.

InShot_20220612_140551303_exported_26166~2.jpg

InShot_20220612_140551303_exported_25333~2.jpg

Luego de dejarla secar por 24horas. Comenzamos con la decoración.

En este punto solo debes dejar volar la imaginación. Particularmente está clienta solicitó que se viera un poco realista y con muchas flores y mariposas.

After letting it dry for 24 hours. We start with the decoration.

At this point you just have to let your imagination run wild. Particularly this client asked for it to look a little realistic and with lots of flowers and butterflies.

InShot_20220517_160122060.jpg

InShot_20220517_160206142.jpg

InShot_20220517_160307953.jpg

separador manualidades.png

ss.gif

Sort:  

Que original y hermosa piñata amiga. felicidades Dios bendiga tus manos y creatividad.

untitled.gif

Jajajajaja el gift 🥳 gracias ❤️

Congratulations, your post has been upvoted by @dsc-r2cornell, which is a curating account for @R2cornell's Discord Community. We can also be found on our hive community & peakd as well as on my Discord Server

Manually curated by @abiga554
r2cornell_curation_banner.png

Felicitaciones, su publication ha sido votado por @dsc-r2cornell. También puedo ser encontrado en nuestra comunidad de colmena y Peakd así como en mi servidor de discordia

Congratulations @mxryp07! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s):

You received more than 3500 upvotes.
Your next target is to reach 3750 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Check out the last post from @hivebuzz:

Feedback from the September 1st Hive Power Up Day
Hive Power Up Month Challenge 2022-08 - Winners List
Be ready for the 9th edition of the Hive Power Up Month!
Support the HiveBuzz project. Vote for our proposal!
Thank you for sharing this amazing post on HIVE!
  • Your content got selected by our fellow curator @rezoanulvibes & you just received a little thank you via an upvote from our non-profit curation initiative!

  • You will be featured in one of our recurring curation compilations and on our pinterest boards! Both are aiming to offer you a stage to widen your audience within and outside of the DIY scene of hive.

Join the official DIYHub community on HIVE and show us more of your amazing work and feel free to connect with us and other DIYers via our discord server: https://discord.gg/mY5uCfQ !

If you want to support our goal to motivate other DIY/art/music/homesteading/... creators just delegate to us and earn 100% of your curation rewards!

Stay creative & hive on!


The rewards earned on this comment will go directly to the people sharing the post on Twitter as long as they are registered with @poshtoken. Sign up at https://hiveposh.com.