Looks like a lot of fun there! Will it fit all three sizes of shells (2 3/4, 3 in, and 3 1/2 in)? And can you mix them, or does it just like one or two sizes? I've seen many semi-auto's get finicky with the variation.
You are viewing a single comment's thread from:
this one is good with 2.75 and 3" but one must change gas pistons to run 3" according to the owners manual... 2.75 heavy loads would prolly run with the 3" piston but 2.75 light loads would not. 2.75 light loads may need other mods to the action, but may void warranty.
im breaking it in with #8 bird shot, 1.125 oz and the reliability for brand new is quite good, over 90%
day 2 saw only a single misfire, I think the bolt was not quite completely into battery, but tthe trigger pulled, no bang. So I cleared the weapon, racked out the shell, no firing pin mark at all on the primer. Reinserted ththe sasame shell and magazine, it ran perfectly from then on. My round count is approaching 100, with 4 failures. not bad for a form factor that is notoriously known for needing an extensive break in period 💙
Always nice to get the real scoop of actual hands on use. Looks like tons of fun!
YES a lot of fun! I've not had hardly any soreness of my shoulder, I think the semi-auto firing system turns most of the recoil energy into useful mechanical force.