A bit over 2 weeks ago I posted about some failed casting experiments and mentioned I got a new smaller diameter nozzle for my 3d printers, link to that post here
Well in this post I got deeper into this topic.
Usually printers come with a 0.4mm diameter nozzle(the hole where the plastic comes out)
Different nozzles sizes are good for different things a thicker nozzle will be able to lay down material faster finishing the prints faster however you get worse detail as the bigger layers and the width of the layer line can catch less details.
A thinner nozzle has the opposite effect it lays down less material and takes more time but you can get more detail.
Now this model is not a great example as the details are not too crazy but it's a fast print so it's a good bench mark.
We start with the standard 0.4 nozzle and 0.2mm layer height right below you can see how it looks like, notice the lines yep not the nicest, this took about 15 minutes to print.
Then I swapped the nozzle with a 0.2 and started with a 0.1 layer height, as you can see bellow it's a lot harder to see the lines and it would potentially show more details in a more complicated model.
Then I tried a 0.05 layer height with the same 0.2 nozzle, in this one it's even harder to see the layer lines and it's a lot more smoother and has room for even more details, however it didn't come out great, that is a matter of messing with the settings on the printer since it's a stretch from the standard 0.4 nozzle and the usual layer height range of 0.15-0.2
Since then I got some more nozzle sizes as well as some extras because they dont' last forever they get worn down over time and sometimes there can be a clog that can't be cleared easily.
along with the standard 0.4 and this new more fine 0.2 nozzle I also got a 0.6 0.8 and a 1.0 these bigger nozzles will give me faster prints but at the cost of details, they all have their uses.
There is a special print mode called vase mode and in that mode the nozzle goes around in a spiral and is only one wall thick this is not great for every model but it allows you to make some very fast prints (usually useful for making vases hence the name) this however means that the part is rather flimsy, however if using a bigger nozzle the wall will be thicker and hence more strong.
Reblog lottery
We got 34 participants for our reblog lottery this time around.
@blessed-20 @blitzzzz @chaosmagic23 @cup-bearer @daniasi @duckmotor @ecencypoints @ekads @ferod23 @fonestreet @henruc @hjrrodriguez @jenam @jhonnygo @jorgebgt @khantaimur @kungfukid @ladymisa @miriammarga @mxm0unite @necho41 @nkemakonam89 @olaf.gui @pepetoken @rebe.torres12 @servelle @stekene @sylmarill @tengolotodo.leo @trautenberk @vaynard86 @vrezyy @ydm6669 and @yova
and the winner this time around is....
Looks like we got a dud, better luck next time !
@ekads! Congratulations enjoy your 10% profit share on this post, 0.33 DUO tokens, 5 HBI units more about HBI units here
The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share, 0.33 DUO token and 5 HBI units (bonus wheel) on my next post
This is all done automatically and I apply the winner to be a beneficiary for the post.
Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.
I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.
@bitcoinman's bits of wisdom
- Invest only what you can afford to lose and be mindful of the potential risks.
- Unless you can accept delivery stay away from futures and stick to physical.
- Leverage is a great tool for losing money fast.
- Numismatics for the lows stick to smart stacking baby.
- Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES
Buy DUO and stake to receive Hive dividends, tip others, have your posts curated and grow Hive!
Learn more about DUO here
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO
You can find out more about the #silvergoldstackers community in this post here
Weekly Post Schedule
| Day | Post |
|---|---|
| Monday | Art&3D |
| Tuesday | |
| Wednesday | |
| Thursday | |
| Friday | Stacker of the week |
| Saturday | Lazy Saturday post |
| Sunday |
Profit share
10% of this post earnings go to @ekads for being our reblog lottery winner.
That's it for today's post thanks for stopping by your support is truly appreciated.
Posted Using InLeo Alpha
That is as much an art as a science... You are learning and improving and making some cool stuff.
!PIZZA
!DOOK
You just got DOOKed!
@thebighigg thinks your content is the shit.
They have 7/400 DOOK left to drop today.
Learn all about this shit in the toilet paper! 💩
Bro imagine that machine doing something crazy like this.
!LOL !DOOK
You just got DOOKed!
@fonestreet thinks your content is the shit.
They have 2/80 DOOK left to drop today.
Learn all about this shit in the toilet paper! 💩
lolztoken.com
It’s the bear minimum.
Credit: reddit
@bitcoinman, I sent you an $LOLZ on behalf of fonestreet
(2/2)
Delegate Hive Tokens to Farm $LOLZ and earn 110% Rewards. Learn more.
This is great....
@bitcoinman ... You've got to print this😭😂😂😂
But the smaller the nozzle time, the more time it takes and greater risk for the nozzle tip getting damaged... Right?
I always wondered about print times. You mentioned the first one was fifteen minutes but didn't mention the other two. As they were smaller nozzles I would expect much slower times.. Curious.
!hiqvote
Hooray.. Thank you very much.
!giphy thanks
Via Tenor
reblogged
You received an upvote of 85% from Precious the Silver Mermaid!
Please remember to contribute great content to the #SilverGoldStackers tag to create another Precious Gem.
Congratulations @bitcoinman! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPCheck out our last posts:
$PIZZA slices delivered:
@hiq.smartbot(1/5) tipped @bitcoinman
thebighigg tipped bitcoinman
@bitcoinman, the HiQ Smart Bot has recognized your request (1/4) and will start the voting trail.
In addition, @bitcoinman gets !PIZZA from @hiq.redaktion.
For further questions, check out https://hiq-hive.com or join our Discord. And don't forget to vote HiQs fucking Witness! 😻
These thingies look funny ^^