HELLO EVERYONE
This is going to be my first post under the GEMS community. On my first post I wanted to show you my new toy. It's typical 3D Printer and after some researches I decided to buy Ender Pro 3
Technical Details
Printing Area: 22x22x25 cm
Printer Size: 44x41x46.5 cm
Case Weight: 8.6 kg
Max. Movement Speed: 180mm/s
Flament: 1.75 PLA,TPU,ABS
Input Voltage: AC 110-220V 50-60Hz
Output: DC24V 15A 360W
Print Thickness: 0.1-0.4mm
Nozzle: 0.4mm
Sensivity: ±0.1mm
File Type: STL,OBJ,G-CODE
Working Mode: Direclty via PC or SD Card
Max Nozzle Heat: 255 C
Max Platform Heat: 110 C
Let's see what I've printed since I bought.
Probably everyone who buys 3D printer starts as trying Pokemons, the color of my flament is orangish it's up to me I can paint them easily whatever color I want. Before painting I apply primer paint on those because paint holds better as doing that.
Filament and product quality are directly proportional, If you want to have quality products you should choose the best one otherwise your printings will be flawed. My filament is like a bit clayish so the quality of products not that good. I use 250 C nozzle and 60 C platform normally 200 C for nozzle is enough and as I said it's up to your flament's quality. At the picture below you'll understand what I mean about centigrade.
You see the crack at the right, It's all about bad quality of flament. I hope I buy new flament and gonna keep updated this series.
Let me know if anyone knows how to use Blender, I'd like to create my own models to print!
Discord: KALVAS#7764