Welcome in this post I share a new little unit I got for 3d printing, I may be a masochist because why I do this to my self 🤣
Anyway lets get into it, this thing is a pellet extruder most 3d printers used roll of filament for 3d printing but this unit can use plastic pellets, you may be wondering why bother, well you see sometimes prints fail and end up being thrown out also even if everything goes well there is some waste as the support structures are useless after a print is done and just go in the trash.
With this unit I should be able to chop down the plastic waste in a blender and then use this pellet extruder to give these failed prints and supports a new life.
I can also potentially take plastic bottles and grind them down and use them to print stuff
I got this form china it has a lot of 3d printed parts and I could have potentially bought the non printed parts and deign and print my own but that would be a lot more work, unfortunately I still have to do some design I need to design and print a mount so that I can set it up on one of my printers and also I will need to design and print something to hold the part cooling fan, maybe some other stuff like a bigger hopper but first I need to see if this thing is gonna be any good 🤣
Hopefully it all works out and I can get rid of my 3d printed waste and potentially even recycle some plastic bottles and such to make some ecofriendly products.
Reblog lottery
We got 24 participants for our reblog lottery this time around.
@blitzzzz @cheeamaka @cup-bearer @daniasi @duckmotor @ecencypoints @ekads @guurry123 @henruc @hjrrodriguez @kungfukid @ladymisa @mirroredspork @mxm0unite @olaf.gui @seki1 @servelle @stekene @sylmarill @trautenberk @vaynard86 @vrezion @ydm6669 and @youloseagain
and the winner this time around is....
And it looks like we got a dud the bonus wheel is sure to hit big soon!
@selflessgem ! Congratulations enjoy your 10% profit share on this post and 5 HBI units , more about
The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share on my next post and 5 HBI units (bonus wheel)
This is all done automatically and I apply the winner to be a beneficiary for the post.
Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.
I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.
@bitcoinman's bits of wisdom
- Invest only what you can afford to lose and be mindful of the potential risks.
- Unless you can accept delivery stay away from futures and stick to physical.
- Leverage is a great tool for losing money fast.
- Numismatics for the lows stick to smart stacking baby.
- Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES
hereYou can find out more about the #silvergoldstackers community in this post
Weekly Post Schedule
Day | Post |
---|---|
Monday | Art&3D |
Tuesday | |
Wednesday | |
Thursday | |
Friday | Stacker of the week |
Saturday | Lazy Saturday post |
Sunday |
Profit share
10% goes to the HOC community account10% of this post earnings go to @selflessgem for being our reblog lottery winner.
That's it for today's post thanks for stopping by your support is truly appreciated.
Posted Using InLeo Alpha
Now that's an interesting addition. Does it heat up the pellets and chopped up pieces to turn it into a sort of filament?
Nope just put the pellets in the hopper and it has a lead screw that brings them pellets into the hot end to be melted and layed down !BBH !LOL !ALIVE
Oh, okay. Very cool!
!BBH
!PIZZA
they do sell machines that make filament but this one is just direct print
lolztoken.com
Or what the judge called a “restraining order”
Credit: reddit
$LOLZ on behalf of bitcoinman
(7/10)
PLAY & EARN $DOOM
@bulliontools, I sent you an!hiqvote
Good thinking. !PIMP
You must be killin' it out here!
5.000 PIMP@enginewitty just slapped you with , @bitcoinman.
You earned 5.000 PIMP for the strong hand.
They're getting a workout and slapped 2/4 possible people today.
Read about some PIMP Shit or Look for the PIMP District
Hopefully it pans out 🤣 !PIMP !DOOK
You must be killin' it out here!
1.000 PIMP@bitcoinman just slapped you with , @enginewitty.
You earned 1.000 PIMP for the strong hand.
They're getting a workout and slapped 1/3 possible people today.
Read about some PIMP Shit or Look for the PIMP District
!DOOK
!DOOK
!DOOK
!DOOK
!DOOK
😂😂😂😂
I can see it's use though, but adding another new extension to the printer which after weeks of headaches has started working...
Seems you might have some new post material till August 😂😂
Hopefully it goes well though, the fact that you could print with recycled plastic bottles is amazing tbh
!PIMP !BBH
You must be killin' it out here!
1.000 PIMP@seki1 just slapped you with , @bitcoinman.
You earned 1.000 PIMP for the strong hand.
They're getting a workout and slapped 1/1 possible people today.
Read about some PIMP Shit or Look for the PIMP District
Lol I'm sure there will be lots of hurdles and problems but it should not be too bad for the printers regular operations, I am swapping to this pellet extruded part I can always take it off and put the original extruded back on for whatever reason. !BBH
!DOOK
I hope it works, that would really cut down on loss of investment when a print goes bad. It's a very cool concept! Let us know if it works!
!BBH
Very true also even when everything goes well still can have support structures that need to be broken off the finished part, they could be recycled and also other plastic from bottles, can also save money, pellets are 1/4 of the price of filament rolls but there are some limitations to pellet extrudeds with it being a hot goop there is no way to pull the material back(this is useful to prevent material leaking out when the head is moving to it's next location to lay down some more plastic ) !BBH
@bitcoinman, the HiQ Smart Bot has recognized your request (1/3) and will start the voting trail.
In addition, @bitcoinman gets !LOOL from @hiq.redaktion.
Discord. And don't forget to vote HiQs fucking Witness! 😻For further questions, check out https://hiq-hive.com or join our
lolztoken.com
Total praktisch, man hört die Kinder so gut wie gar nicht mehr.
Credit: r0nny
$LOLZ Token gesendet
Verwende den Befehl !WITZ oder !LOOL, um einen Witz und ein $LOLZ zu teilen.
NEW: Join LOLZ's Daily Earn and Burn Contest and win $LOLZ
.(3/8)@bitcoinman, ich habe dir im Namen von @hiq.smartbot einen
You received an upvote of 90% from Precious the Silver Mermaid!
Please remember to contribute great content to the #SilverGoldStackers tag to create another Precious Gem.
$PIZZA slices delivered:
(1/5) @bulliontools tipped @bitcoinman
reblogged
!DOOK
!DOOK
!DOOK