Can I ask which brand of putty you used to fill your screw holes please? I always have problems with mine sinking when it dries! I'm in Thailand by the way so not far.
Did you use brush or sprayer for the paint please, sand it a little between coats and did you water the paint down a little? Its so smooth but the colour is so deep! I'm very impressed. My painting always lets me down, especially painting plywood because its so smooth to start with.
thanks in advance :-)
for the putty, I usually use this
Impra wood filler
so that the putty results from the screw marks are the maximum, I usually do the putty process up to 3 times with a thick putty until the screw marks are completely flush with the wood surface, then I continue by caulking the entire surface the project to be painted using putty which I mixed with a solution (oil or thinner), then sanded it using fine sandpaper (240,400) for maximum results.
And for the paint, I stirred a little liquid in the first layer, and then I sanded it with fine used sandpaper and sanding it shouldn't be pressed too hard it just floats and I do that step again after the second layer and so on until I feel the paint results are maximized, I hope my explanation can help and thank you for asking...