THE SENSORS

[joudaz]

Mechanical vibration is measured in three parameters:

    ** Acceleration (ms-2 where g) measured by accelerator)

Photo source https://www.baumer.com/pl/fr/apercu-du-produits/capteurs-d-inclinaison-d-acceleration/capteurs-d-inclinaison/c/326

    ** Displacement (µm) measured by (Displacement or proximity sensor) 

Photo source https://www.baumer.com/pl/fr/apercu-du-produits/detection-dobjets/detecteurs-de-proximite-inductifs-/robustes/c/13507

   ** Speed (mms-1) measured by (Speed Sensor/ Velocimeter)

Photo source https://www.directindustry.fr/prod/rheintacho-messtechnik-gmbh/product-40140-1877693.html

Vibration sensors are used for inspection and measurement of machine vibration in service

Several defects such as an alignment defect, an imbalance defect, the resonance phenomenon can be the source of the deterioration of the mechanism for this we resort to the installation of these sensors to control and monitor the machines.

Photo source https://dbvib-consulting.com/diagnostic-par-analyse-vibratoire/

e

Comments

[hivebuzz]

Congratulations @joudaz! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s):

You received more than 10 upvotes. Your next target is to reach 50 upvotes.

_{You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP}

Check out the last post from @hivebuzz:

	Hive Power Up Month challenge - Feedback from February day 3
	Our Hive Power delegations to the last Power Up Month challenge Winners
	Feedback from the February 1st Hive Power Up Day

Support the HiveBuzz project. Vote for our proposal!