Pozdrav prijatelji i ljubitelji zavrsnih, ukrasnih i dekorativnih tehnika u enterijeru.
Imam privilegiju da sa vama podelim svoje radove i iskustvo.
Danasnji post posvecen je uredjenju i ulepsavanju zivotnog prostora.
Kako od malterisanog zida nastaje oplemenjen i prelep zid ukrasen keramickim reljefnim plocicama sa motivom prirodnog cepanog kamena secenog u stanglice.
Hello friends and fans of finishing, decorative and decorative techniques in the interior.
I have the privilege to share my work and experience with you.
Today's post is dedicated to arranging and beautifying living space.
As a plastered wall, a refined and beautiful wall decorated with ceramic relief tiles with a motif of natural split stone cut into bars is created.
Kao prvo pod ocistim, rasirim gradjevinski najlon preko da se ne bih slucajno isprljao ili ostetio.
Kada sve lepo zastitim, spaklom prestruzem zid kako bih uklonio neravnine i skinuo necistocu od malterisanja.
Nakon toga pristupam impregnaciji zida duboko penetrirajucom podlogom nanoseci je valjkom i cetkom dva puta u razmaku od pet do sest sati u zavisnosti kojom brzinom zid upija.
Kada zavrsim impregnaciju ostavim zid da upija i da podloga odradi svoje narednih dvadeset cetiri sata.
First under the cleaner, I spread the construction nylon over so I don’t accidentally get dirty or damaged.
When I protect everything nicely, I scrape the wall with a spatula to remove the unevenness and remove the dirt from plastering.
After that, I approach the impregnation of the wall with a deeply penetrating substrate, applying it with a roller and brush twice at intervals of five to six hours, depending on how fast the wall absorbs.
When I finish the impregnation I leave the wall to absorb and let the substrate do its next twenty-four hours.
Nakon sto se podloga osusila mogu da nastavim sa radom.
U kantu sipam vodu i polako dodajem lepak za plocice uz neprestalno polako mesanje sa mesacem za lepak sve dok masa ne postane kompaktna.
Lepak ostavljam da odstoji petnaest minuta, pa ga ponovo dobro izmesam sa mesacem za lepak nakon cega je spreman za rad.
Kada lepim zidne plocice skoro uvek pocinjem iz desnog donjeg ugla.
After the substrate has dried, I can continue working.
I pour water into the bucket and slowly add the tile adhesive, stirring constantly with the glue mixer until the mass becomes compact.
I leave the glue to stand for fifteen minutes, so I mix it well again with the glue mixer, after which it is ready to work.
When I glue wall tiles, I almost always start from the bottom right corner.
Prvo na zid nanesem lepak grebenastom hoblom nekih metar i po u zavisnosti od velicine plocica, nakon cega nanosim istim alatom lepak i na plocice i zapocinjem lepljenje plocica na zid.
Kako bi sve bilo u ravni i jednako koristim libelu.
Posto je ovaj model plocica na uklapanje takozvani Puzzle model, ne koristim krstice za fugne jer ih nema.
Takodje ne koristim ni plasticne nivelator kajle jer ne trebaju da se ne bi izgubio autentican izgled cepanog kamena u stanglicama.
First, I apply the glue to the wall with a ridged trunk about a meter and a half, depending on the size of the tiles, after which I apply the glue to the tiles with the same tool and start gluing the tiles to the wall.
To keep everything level and equally I use a spirit level.
Since this model of tile fits the so-called Puzzle model, I do not use crosses for joints because there are none.
I also don't use plastic leveling kayels because they don't need to, so as not to lose the authentic look of the split stone in the bars.
Krajeve plocica secem masinom za secenje plocica, dok rupe za utikace i prekidace busim sa busilicom opremljenom alatom za busenje rupa koji se zove dijamantska krunica za busenje keramike.
I tako lagano radim, lepim, krojim i busim.
Lagano nizem red po red sve do samog vrha.
I cut the ends of the tiles with a tile cutting machine, while I drill holes for plugs and switches with a drill equipped with a tool for drilling holes called a diamond crown for drilling ceramics.
And I work so lightly, beautiful, tailoring and drilling.
I slowly lower myself one by one all the way to the very top.
Na kraju moji dragi prijatelji zavrsavam polako.
A kako izgleda ?
Evo ovako izgleda sam finis.
In the end my dear friends I finish slowly.
And what does it look like?
This is what the finish looks like.
Nakon par sati kad se sve malo stegne vlaznim sundjerom nezno prebrisem plocice kako bih uklonio i najmanju necistocu ako je ostala od lepka.
Pokupim gradjevinski najlon koji je sluzio da zastiti pod, pocistim sve sa metlom i prebrisem sa sundjerom i vodom.
Sada kad je sve gotovo, mogu da spakujem alat i popijem kafu i sok sa zadovoljnim vlasnikom kuce.
Iskreno se nadam da vam se svidja post.
Uvek sam tu da pomognem, nekome savetom a nekome mogu i da ulepsam dom svojim radom.
Jos jednom se iskreno zahvaljujem svima koji su izdvojili vreme da vide i procitaju moj rad.
Do sledeceg post-a zivi i zdravi mi ostajte u sreci i veselju.
After a couple of hours, when everything is a little tight, I gently wipe the tiles with a damp sponge to remove even the slightest dirt if it is left from the glue.
I pick up the construction nylon that served to protect the floor, clean everything with a broom and wipe with a sponge and water.
Now that it’s all over, I can pack up the tools and have coffee and juice with the contented homeowner.
I sincerely hope you enjoy the post.
I am always there to help, with some advice and someone I can beautify my home with my work.
Once again, I sincerely thank everyone who took the time to see and read my work.
Until the next post, stay alive and healthy, stay in happiness and joy.
Pozdrav od vašeg Filipa, uživajte. 🇷🇸
Greetings from your Filip, enjoy. 🇺🇸