How to install a sink

Let's talk about how to install a sink in the kitchen. In fact, it is not difficult, but many cause a specialist and pay money. After reading this article, you can install the shell yourself. How to do it, I'll tell you now.

First, you need to drill four holes on the wall to the size of the sink. To strengthen in these openings four plastic dicable.
Screw the corners of the sink from the kit with screws. At the corners set the sink so that it would hold tight. Screw the sink to the corners with screws.
Install the valve in the holes with two hoses, carefully fix the valve with a nut so that it does not hang.
Install a siphon to drain the water to the bottom opening of the sink. Siphons are installed in different ways. Carefully see the picture in the instructions from the sink. The lowest part of the siphon must be connected to the sewer system.
Hoses from the crane, you need to connect to the water supply. One hose to cold water, and the other to hot.
On the thread wind a special winding, so that water does not leak. Carefully check everything. Experts recommend that after installing 20 minutes, do not use.
Cover the gap between the wall and the sink. To do this, use a sealant.
Turn on the water. If there are no leaks, then work on installing the sink for the top. Now you know that it is not difficult to install a sink. Enjoy your use.