The principle is as follows: With the help of induction heating in the cylinder, the "heating element" is heated to the desired temperature above 600 degrees Celsius,
Liquid alcohol, water or "special mixture" is supplied to the cylinder with a temperature of about 75-80 ° C.
It is necessary to achieve a very rapid "evaporation" (not combustion), at the level of the explosion.
Then the steam goes to the condenser, is cooled to 75-80 ° C and back to the cylinder.
The engine in turn drives the generator on neodymium magnets, which in turn feeds the filament elements ..
The point is that to minimize the loss of energy for heating and the loss of heat itself on the heating elements themselves,
thereby gain energy from pressure.
You can use makeup from solar panels.
The first start of the engine, respectively, feeds the batteries.
We are all dreamers in our hearts!=)
**
Congratulations @romantik! You received a personal award!
You can view your badges on your Steem Board and compare to others on the Steem Ranking
Vote for @Steemitboard as a witness to get one more award and increased upvotes!