asMODus Lustro 200W

s, Sup Vapers LorenzoTheVaper here again with another asMODus Review today we'll talk about the LUSTRO 200W a sort of a third version of the Minikin.

Like always before talking about considerations, pros and cons let's see some technical specifications.

asMODus LUSTRO 200W Specifications & Features:

Requires 2x 18650 sized batteries (not included)
Touchscreen type: Capacitive Screen; Requires the electrical properties of the human body to detect when and where the screen is touched
Wattage range (Power mode): 5W - 200W
Wattage range (TC modes): 5W - 120W
Temperature control range: 212° - 572°F / 100° - 300°
Atomizer ohm range: 0.1 - 2.5 ohm
Max output voltage: 7.5V
Peek output current: 45A
Charging parameters: DC 5V/1A
Upgradeable firmware
USB TYPE-C

asMODus LUSTRO 200W Dimensions:

Length: 80.4mm
Width: 40.5mm
Thickness: 36.0mm

What's inside the package:

1x one USB TYPE-C charger
Lustro 200w

Safety Precautions:

Short Circuit Protection
Overcurrent Protection
Reverse Polarity Protection
Under-Voltage Protection
High Resistance Protection
Thermal Protection
Over Voltage Protection
Low Resistance Protection

How Lustro works:

With 5 Clicks you can turn on the mod and access to the menu, in the menu, you can find plenty of features like puff counter, boost mod, firmware upgrade, switch led on/of etc... Sliding down with the thinger you unlock the mod and sliding up you can turn on the light or turn off the gesture capture. With 3 clicks you will totally block the mod. Sliding left or right you will get in the various modalities like TCR, TFR, CURVE, POWER or TEMP.

First Impressions on asMODus Lustro 200W:

Ok, guys, the first impression when I took the mod out the package it looks really similar to the Minikin 2, it is really solid, compact and fit well in the hand. The paint looks cheap but really well made and I like the shiny on it. After you turn it on you definitely note that the touchscreen is really busy and I also found a bit hard to use the gesture thing. The battery slots are really well made and the negative goes in both side in the springloaded pin, they also studied really well the pin for the positive.

asMODus LUSTRO 200W Pros and Cons

PROS:

Touchscreen
Plenty of features
Nice menu
Different modalities
Gesture Capture
Batteries door
Quality Materials
Batteries slots design
Batteries Gestion
Flashlight
Possibility to turn off the LEDs

CONS:

Too busy Screen
Sometime gesture capture doesn't work
Only 25mm Atomizer Max

Final Thoughts:

Alright Guys, final considerations, it surely is the perfect successor to the Minikin 2. It works really well, sometimes there are problems with the gesture capture but after you understand how to use it will work well, anyway, there is the possibility to turn it off. There are a lot of features inside this mod and the chip really work well, nevertheless, the screen is a bit to busy for me, the boost mod works really well as the TCR, TFR etc... You can find this box at 75$ on asMODus website but even at a lower price in other websites so the price is really good for a high-quality product like this.

Suggestions to asMODus Team:

My Dear asMODus team we are here again for some suggestions, for me it would be nice if you could add a possibility to remove the ''wattometer'' and get a normal screen that shows us everything without taking to much space. Try to improve the gesture capture because I think it is a great idea. The last thing, it would be nice to have the 510 pin more in the center in the way to be able to mount bigger atomizer.

asMODus Lustro 200W Video:

THANKS FOR READING, DEAR VAPERS. I REALLY APPRECIATE. I HOPE THIS REVIEW WAS HELPFUL TO YOU. IF YOU WANT TO KNOW MORE ABOUT ME, YOU CAN CHECK MY INSTAGRAM PAGE AND MY PERSONAL BLOG.

Remember guys, keep on vaping but do it safely!!!

asMODus Lustro 200w – Review