The code:
//
// begin license header
//
// This file is part of Pixy CMUcam5 or "Pixy" for short
//
// All Pixy source code is provided under the terms of the
// GNU General Public License v2 (http://www.gnu.org/licenses/gpl-2.0.html).
// Those wishing to use Pixy source code, software and/or
// technologies under different licensing terms should contact us at
// [email protected]. Such licensing terms are available for
// all portions of the Pixy codebase presented here.
//
// end license header
//
#include <SPI.h>
#include <Pixy.h>
#define X_CENTER 160L
#define Y_CENTER 100L
#define RCS_MIN_POS 0L
#define RCS_MAX_POS 1000L
#define RCS_CENTER_POS ((RCS_MAX_POS-RCS_MIN_POS)/2)
class ServoLoop
{
public:
ServoLoop(int32_t pgain, int32_t dgain);
void update(int32_t error);
int32_t m_pos;
int32_t m_prevError;
int32_t m_pgain;
int32_t m_dgain;
};
ServoLoop panLoop(200, 200); // Servo loop for pan
ServoLoop tiltLoop(150, 200); // Servo loop for tilt
ServoLoop::ServoLoop(int32_t pgain, int32_t dgain)
{
m_pos = RCS_CENTER_POS;
m_pgain = pgain;
m_dgain = dgain;
m_prevError = 0x80000000L;
}
void ServoLoop::update(int32_t error)
{
long int vel;
char buf[32];
if (m_prevError!=0x80000000)
{
vel = (error*m_pgain + (error - m_prevError)*m_dgain)>>10;
//sprintf(buf, "%ld\n", vel);
// Serial.print(buf);
m_pos += vel;
if (m_pos>RCS_MAX_POS)
m_pos = RCS_MAX_POS;
else if (m_pos<RCS_MIN_POS)
m_pos = RCS_MIN_POS;
//cprintf("%d %d %d\n", m_axis, m_pos, vel);
}
m_prevError = error;
}
class DCMOTORS{
private:
int leftSpeed;
int rigthSpeed;
int leftDir;
int rightDir;
public:
DCMOTORS(){
leftSpeed = 9;
rigthSpeed = 10;
leftDir = 4;
rightDir = 7;
pinMode(leftDir, OUTPUT);
pinMode(rightDir, OUTPUT);
pinMode(leftSpeed, OUTPUT);
pinMode(rigthSpeed, OUTPUT);
//Enable the Motor Shield output;
pinMode(6, OUTPUT);
digitalWrite(6, HIGH);
}//end DCMOTORS
int setLeftSpeed(int speed){
if(speed > 0){//forward
digitalWrite(leftDir, HIGH);
analogWrite(leftSpeed, speed);
}else{//backward
digitalWrite(leftDir, LOW);
analogWrite(leftSpeed, speed);
}
}//end set
int setRightSpeed(int speed){
if(speed > 0){
digitalWrite(rightDir, HIGH);
analogWrite(rigthSpeed, speed);
}else{
digitalWrite(rightDir, LOW);
analogWrite(rigthSpeed, speed);
}
}//end set
};
Pixy pixy;
void setup()
{
Serial.begin(9600);
Serial.print("Starting...\n");
pixy.init();
}
uint32_t lastBlockTime = 0;
DCMOTORS motors;
//---------------------------------------
// Main loop - runs continuously after setup
//---------------------------------------
void loop()
{
uint16_t blocks;
blocks = pixy.getBlocks();
// If we have blocks in sight, track and follow them
if (blocks)
{
int trackedBlock = TrackBlock(blocks);
FollowBlock(trackedBlock);
lastBlockTime = millis();
}
else if (millis() - lastBlockTime > 100)
{
motors.setLeftSpeed(0);
motors.setRightSpeed(0);
ScanForBlocks();
}
}
int oldX, oldY, oldSignature;
//---------------------------------------
// Track blocks via the Pixy pan/tilt mech
// (based in part on Pixy CMUcam5 pantilt example)
//---------------------------------------
int TrackBlock(int blockCount)
{
int trackedBlock = 0;
long maxSize = 0;
// Serial.print("blocks =");
//Serial.println(blockCount);
for (int i = 0; i < blockCount; i++)
{
if ((oldSignature == 0) || (pixy.blocks[i].signature == oldSignature))
{
long newSize = pixy.blocks[i].height * pixy.blocks[i].width;
if (newSize > maxSize)
{
trackedBlock = i;
maxSize = newSize;
}
}
}
int32_t panError = X_CENTER - pixy.blocks[trackedBlock].x;
int32_t tiltError = pixy.blocks[trackedBlock].y - Y_CENTER;
panLoop.update(panError);
tiltLoop.update(tiltError);
pixy.setServos(panLoop.m_pos, tiltLoop.m_pos);
oldX = pixy.blocks[trackedBlock].x;
oldY = pixy.blocks[trackedBlock].y;
oldSignature = pixy.blocks[trackedBlock].signature;
return trackedBlock;
}
//---------------------------------------
// Follow blocks via the Zumo robot drive
//
// This code makes the robot base turn
// and move to follow the pan/tilt tracking
// of the head.
//---------------------------------------
int32_t size = 400;
void FollowBlock(int trackedBlock)
{
int32_t followError = RCS_CENTER_POS - panLoop.m_pos; // How far off-center are we looking now?
// Size is the area of the object.
// We keep a running average of the last 8.
size += pixy.blocks[trackedBlock].width * pixy.blocks[trackedBlock].height;
size -= size >> 6;
// Forward speed decreases as we approach the object (size is larger)
int forwardSpeed = constrain(400 - (size/256), -100, 400);
// Steering differential is proportional to the error times the forward speed
int32_t differential = (followError + (followError * forwardSpeed))>>8;
// Adjust the left and right speeds by the steering differential.
int leftSpeed = constrain(forwardSpeed + differential, -400, 400);
int rightSpeed = constrain(forwardSpeed - differential, -400, 400);
// And set the motor speeds
motors.setLeftSpeed(leftSpeed);
motors.setRightSpeed(rightSpeed);
}
//---------------------------------------
// Random search for blocks
//
// This code pans back and forth at random
// until a block is detected
//---------------------------------------
int scanIncrement = (RCS_MAX_POS - RCS_MIN_POS) / 150;
uint32_t lastMove = 0;
void ScanForBlocks()
{
if (millis() - lastMove > 20)
{
lastMove = millis();
panLoop.m_pos += scanIncrement;
if ((panLoop.m_pos >= RCS_MAX_POS)||(panLoop.m_pos <= RCS_MIN_POS))
{
tiltLoop.m_pos = random(RCS_MAX_POS * 0.6, RCS_MAX_POS);
scanIncrement = -scanIncrement;
if (scanIncrement < 0)
{
motors.setLeftSpeed(-175);
motors.setRightSpeed(175);
}
else
{
motors.setLeftSpeed(+90);
motors.setRightSpeed(-90);
}
delay(random(175, 250));
}
pixy.setServos(panLoop.m_pos, tiltLoop.m_pos);
}
}