My Roleplaying Game Table: 200 hours later...When failure happens...

in #rpg6 years ago (edited)

In my past blogs, I have shown a lot of pictures of things I made for my gaming room... Successful, finished projects... But I also have failed projects and this is one of them... Here is a little background on what made me start this project to begin with:

It was a good 4 to 5 years ago, I wanted to start a Warhammer Roleplaying game campaign... The very first adventure the players were starting with had a Mansion within a compound with multiple buildings... The way this adventure was ending was relatively open ended... So I thought that the players would actually keep the mansion and make it their main base of operation/house. I already had in mind to have some raids happening there from Chaos Beastmen, Orcs, etc... and that every now and then... they would have to defend their property against the invaders...

I liked my idea very much and it was also a way to introduce a center piece to the players.... giving them a better immersion into the campaign. At that point in time, I did not have a 3D printer... So my options were to either build everything from scratch using styrofoam, foamcore, etc... or to use recently acquired moulds from Hirst Arts. Those molds are designed to cast Plaster of Paris, Resine or other material... I opted for Hydrostone... which is much stronger than Plaster of Paris and much cheaper... a bag of 100 pounds (Dry) of Hydrostone was running at roughly $50 CAD...

Each square for the flooring is 1" X 1"... So the main building was to be over 20" long. Now, put in perspective the size of the terrain I made that was specific to that building... Roughly 3' X 4' ...
IMG_1185.JPG

Before even starting the building, I made the terrain that goes under and around it... So I could have a very good idea of what the layout would have to be... Took me several hours to do the ground and the ponds... But I did like where it was heading in terms of look...
IMG_1188.JPG

The mansion had to have 2 floors... so after finishing the first floor, I started the second floor... The moulds allow more to make small bricks (about 12-20 at a time) and each cast takes about 30 minutes to set... Then you have to wait 24-26 hours for the bricks to dry...(Or in my case, use a dehydrator and get it dry in 2 hours)
IMG_1189.JPG

As I mentioned above... I casted the parts with Hydrostone... Which is freaking CONCRETE... therefore not light one bit... So as the project keep going forward... the weight keeps going up...
IMG_1191.JPG

I kept going... creating the layout for the upstairs' bedrooms, walls, etc...
IMG_1196.JPG

Every now and then... had to take a break from the casting and building... so I was painting the first floor to break the monotony of the repetitive crap that is gluing those bricks one by one
IMG_1199.JPG

The project was getting bigger and harder to store... and more importantly HEAVIER too... When I took this picture, this is when reality started to sink in... I did not think this through before starting.... At that point I was living in a condo downtown Toronto... which mean a shoebox size living space in a sky scrapper with no storage... Now, the kitchen table was committed to that project for over a month and my wife patience was inversely proportional to the weight of my project...
IMG_1201.JPG

Progress was made... But it was at the same time we bought our house... So now... I had to think about how in the hell am I going to move that (in a moving truck) without arriving at the house with a box full of broken parts...
IMG_1220.JPG

I was really liking the building and how majestic it was in size...
IMG_1221.JPG

Painting it was relaxing and rewarding....
IMG_1222.JPG

But came the moving day... that had to be packed...
IMG_1223.JPG

As you may have already concluded... The project did not quite make it through the move... I reached the destination broken in several places... Because of that and the lack of motivation to try to fix that newly made puzzle of bricks... I left that project untouched for a few years...

The other day, while going through boxes looking for something else... I came across it... It was time to let it go... find it a new place... One of my friend who just started into the Wargaming hobby a year ago was still trying to acquire basic terrain, etc... So I decided to give him the box and then several more boxes of bricks, etc.. so he can have fun for a long time...

So what was the failure? Creating a GIGANTIC piece that had only 1 purpose... The entire thing was not convenient for my gaming room set up.... I love my stuff to be modular and multipurpose... I like it to be easy to organize (in plastic containers)... The failure was to realize that creating something the size of freaking couch is not the best of the idea when I already have so much gaming stuff...

Sort:  

I didn't realize until now that there were so many pieces still to one of your builds. For some reason I though the molds were made to make pieces that appeared to be bricks but were in sheets.

This specific project had literally thousands of parts... Believe it or not... it take a bit of patience to do those things lol :)

Great project Dive. Glad you learned something about building large things inside apartments. Your wife must be a saint to put up with your hobbies.

Nevermind the hobbies.... she is a saint for being with me period :)

I know a guy that built a huge over-weight mansion on a trailer frame in a fairy meadow. It didn't sink into his head but it did start sinking into the ground.

Hahahahahahahahaha. No pallet wood was used in my project :)

Damn it this is such a shame, sometimes passion get the better of ourselves and the dining table lol, this made me remember a video I watched about a Warhammer battle, they built the whole set recreating the battle at Kislev Gates, it was HUUUUGE and amazing but then I was thinking what the hell are they going to do with all of that?! It was like a whole room for real! The whole thing was massive

I certainly learned from this project... No need to do huge things... better do smart things :)

I feel yer pain...

It was indeed painful... But I get some positive out of it: A) I am planning my builds a lot better now. B) A friend of mine was very happy to get it C) Gave me something to share and blog about years later :)

Hi divecrewcanada,

This post has been upvoted by the Curie community curation project and associated vote trail as exceptional content (human curated and reviewed). Have a great day :)

Visit curiesteem.com or join the Curie Discord community to learn more.

I know the feeling of building something and then finding it broken . I needed a huge table to set veg transplants out on last year so i built one . In a hurry to get it done , i had plants that desperately needed space ; i threw one one together DIY WORLD in design . After it was done i filled it with several hundred seedlings and was very happy i had them spaced out with room for air circulation . The next morning i went out to water them and found them in a huge pile on the ground . The screws failed and the legs caved in .

It is never a problem to have a failure as long as something was learned in the process... so that the same mistake is not repeated over and over... Some people gets it... 1 person doesn't :)

Congratulations @divecrewcanada! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :

You received more than 2000 upvotes. Your next target is to reach 3000 upvotes.

Click here to view your Board
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @steemitboard:

SteemWhales has officially moved to SteemitBoard Ranking
SteemitBoard - Witness Update

Support SteemitBoard's project! Vote for its witness and get one more award!

RPG genre has always been one of the most compelling, and it has had such an influence. Great project!

This post was nominated by a @curie curator to be featured in an upcoming Author Showcase that will be posted in about 12 hours on the @curie blog.

NOTE: If you would like us to NOT feature your post in the Author Showcase please reply, or DM me on Discord as soon as possible. Any photos or quoted text from your post that we feature will be properly attributed to you as the author.

  • If you would like to provide a brief statement about your posting, your life or anything else to be included in the article, you can do so in reply here or look me up on Discord chat (@jhnmunoz#2372). This personal addition to my article can be of great value.

You can check out our previous Author Showcase to get an idea of what we are doing with these posts.

Thanks for your time and for creating great content.

Johanna (@curie curator)


This piece is worth waiting to see the beauty of the design.