It wasn't a warm day in Calgary, but in my mind it was warm and beautiful like a summer day at Idaho falls. It was 14 days since I had set up my first #smartnode using Linode I was proudly one of the first 400 nodes set up. The 25th of January had just come by and #smartrewards had been paid and thanks to winning some smarts on a previous article - When The Going Gets Tough and the "generous rain" I now had enough for a second smartnode hurray! Setting up the second node was a charm as there was now a SmartNode in 10 minutes Guide in place. This time I used Vultr as my account was now approved and I wanted to really test out the smart Node in 10 minutes. It worked! No surprises there. It was created by the smartcash Dev team - what can I say they rock. The real test was if I could pull it off and not make any stupid mistake seeing I had to translate my IT skills from a Windows environment to Mac (a steep learning curve). My nodes were up and running and life was good - all that was left was count down to Block 300000.
THIS IS NOT HAPPENING
Sometime on Saturday the 27th I decided to check on node. My first node on Linode had stopped 14 hours ago! What the ....
there goes my early start advantage! I might as well have waited to earn my #smartrewards on this too. Calm down I say to myself. I launch my smartcash qt wallet with the intention to re-start my smartnode. That should fix it I tell my self. Two hours later and no change - status is still "Pre Enabled" I decide to reboot from the console of the server and decided to add some cron jobs - (automated scripts to carryout set task) it was at this point I found out I could not execute a a simple task because my storage was full! Storage full? With what? We had not even started. Further investigation showed that my storage on Linode was filled up with backups they had taken pretty much every other day. As my node was 14 day old there were at least 7 copies and one of the snapshot I had paid to take. This should be a problem. I will just delete the backup an switch it off leaving just a current snapshot. The funny thing here was the portal that was supposed to allow me manage images was in beta so nothing showed up.
DECISION TIME
- So here I was with a smartnode that had been set up on the first day not running because the server was out of storage. It should not be because I had 30GB
- The portal on Linode to manage images was not accessible
- I needed to get my node up and running as soon as possible
I decide to move my first node to Vultr where the second one had been set up a few day back. I logged on to Vultr took a snapshot of the node already running and deployed it to a server with the same specification. I only had to edit one conf item on the server and update my local conf file with the new IP and it was up and running.
LESSONS LEARNT
- Be patient there is no hurry
- Life happens and you just have to go with the flow
- Do not reinvent the wheel. - Stay with a proven solution - Vultr
- Never cry over spilled milk - keep moving
- Challenges are opportunities to learn. I can now spin off new nodes in minutes
- Take advantage of the cron jobs to automate important jobs if you set up your nodes earlier on
- Be prepared
- Always have a backup plan.
Did you have any unexpected challenges setting up your smartnodes? Please upvote and leave a comment.
Learn More About Smartcash:
Smartcash.cc
Join Our Community:
FORUM
TWITTER
REDDIT
FACEBOOK
TELEGRAM
DISCORD
INSTAGRAM
My Smart Address: SZuD6sbjBwToeYcuU6Td4MAqU5H5SWi9MJ
Please Read My Other Articles
It's Raining Smartcash
When the going Gets Tough
How to Invest in SmartCash part 1 -for Non Geeks
How to Invest in SmartCash part 2 - for Non Geeks
Introduce your Teens to smartCash
SmartCash Coin of the Future
a couple of thoughts for you
although it's a VPS on Digital Ocean you will get the gist to do the same on vultr
Thanks. As I followed the guide 1.0 for my initial setup after running the bash script I also ran the ufw command to close / open relevant ports and limit ssh. I will read your article thanks. I am currently monitoring using @bitcoiner site and with the Vultr api on my phone. I will also be looking forward to the development of the telegram /discord bot to monitor the nodes.
I couldn't agree more with you. Look forward to the discord bot to monitor
Good thing you figured it out. I am one of those lazy bastards that once done do not ever go back. When I to it will be far too late to have fixed the problem. Congrats on the achievement. 2 smartnodes, dang, I have a lot to catch up on ;)
Thanks. I had a bit more time on my hands. I pretty much live on the smartnode's discord channel reading all changes made to the install process and reading issues other have had or are having. It was a part of time before I fiddled with the setup to add or remove something.
If you follow ,upvote ,comment and resteem me I will do same
hahaha proud moment when you get the SmartNode set up right? but definitely a little stressful getting there!
Very true. I just finished watching your video. Great presentation. Good thing I found out Linode had filled up my storage with backups which I could not delete causing the server to stop. It could have been worse.
periodically check the size of your debug.log if it gets too big, shut down smartnode, then delete debug.log then restart the smartnode. if it is done within 10min's it will remain in its position and go back to enabled very quickly.
or for those that are linux ninja's cronjobs will work better
Thanks. I have gone the way of cron jobs. It make more sense. Its a pity I lost my position 187 and went to down to 2689
@smartbot tip @nitego 10
Σ$$$ Tipped @nitego
Σ10 SMART! Comment@smartbot helpto claim. Currently the price of SmartCash in the market is$0.463 USDperSMART. Current value of the tip is$4.63 USD. To find out more about SmartCash, please visit https://smartcash.cc.Thanks