Method of preparation:
– Carefully weigh one by one the oils listed in the recipe.
– Add the sodium base to the indicated amount of water and mix well until it dissolves.
– In a suitable container, mix the solid oils (coconut, palm oil) and place them on the hot plate. It is necessary to continuously stir the mixture using a wooden spoon, and the temperature should not exceed 110 degrees.
– Once the solid oils have been melted, add the liquid / olive oil, sunflower, rapeseed / oil, which should be at room temperature. Adding them will lower the temperature of the mixture, which should be about 100 degrees when adding the aqueous sodium hydroxide solution.
– Take the blender in your hand and be ready for the real action.
– Slowly add the solution until you mix the soapy mixture with the blender. The oils will instantly “cloud” and the actual start of the saponification process will begin.
– After adding sodium salt to the oils very carefully, there is a chemical reaction between them, and you must constantly mix the mixture.
– Switch the blender on and off for a certain amount of time, and when it is switched off, do not stop mixing with it until the oils and caustic soda mix completely blend.
– Add the aroma or essential oils you have chosen, and we recommend using a blend of lavender, patchouli and orange essential oils. This is one of the most fun steps.
– Pour the mixture thus obtained in a suitable form and wait for it to harden within 24 hours. If the shape is elongated, then you can cut it and head to the bathroom to reward yourself with the natural care of your beauty.
Again! Carefully weigh one by one the oils listed in the recipe!!!
Method of preparation:
– Carefully weigh one by one the oils listed in the recipe.
– Add the sodium base to the indicated amount of water and mix well until it dissolves.
– In a suitable container, mix the solid oils (coconut, palm oil) and place them on the hot plate. It is necessary to continuously stir the mixture using a wooden spoon, and the temperature should not exceed 110 degrees.
– Once the solid oils have been melted, add the liquid / olive oil, sunflower, rapeseed / oil, which should be at room temperature. Adding them will lower the temperature of the mixture, which should be about 100 degrees when adding the aqueous sodium hydroxide solution.
– Take the blender in your hand and be ready for the real action.
– Slowly add the solution until you mix the soapy mixture with the blender. The oils will instantly “cloud” and the actual start of the saponification process will begin.
– After adding sodium salt to the oils very carefully, there is a chemical reaction between them, and you must constantly mix the mixture.
– Switch the blender on and off for a certain amount of time, and when it is switched off, do not stop mixing with it until the oils and caustic soda mix completely blend.
– Add the aroma or essential oils you have chosen, and we recommend using a blend of lavender, patchouli and orange essential oils. This is one of the most fun steps.
– Pour the mixture thus obtained in a suitable form and wait for it to harden within 24 hours. If the shape is elongated, then you can cut it and head to the bathroom to reward yourself with the natural care of your beauty.
Again! Carefully weigh one by one the oils listed in the recipe!!!