Hello friends all ...
of course we've heard with a computer network or the so-called local network (local area network).
well, this time I will share a little about starting a local network, will be before that, of course we must first understand by way of mengrimping LAN cable.
what things must be prepared:
about the cable in the skin of the cable.#Peel the skin of UTP cable with Tang Krimping, be careful peel it not to
#After the Leather cables are peeled the result will be like the picture below.
White Orange, orange, White Green, Blue, White Blue, Green, White brown, brown#Arrange the color of the cable as shown below
by cutting it using creampot pliers.#if the color is to fit the image straighten the cord and flatten the tip
connectors.
grab the RJ-45 connector, see the picture below holding the connector#If the end of the cable has been flattened like the picture above, then plug it in
Note the connector, the connector latch is on the back.
when the lock of the connector is in front immediately adjust as shown above
pin that is in the connector#Insert the cable into the connector and press for the end of the cable to touch with
cream, press until the sound clicks and the installation is complete.#When the connector is mounted on the cable, press the connector using the pliers
#Repeat the steps above for the installation of the other end of the cable connector.
Good luck, good luck always accompany you all.
love it!
Congratulations @fauzanspdi! You have completed some achievement on Steemit and have been rewarded with new badge(s) :
Click on any badge to view your own Board of Honor on SteemitBoard.
For more information about SteemitBoard, click here
If you no longer want to receive notifications, reply to this comment with the word
STOP