Creating wye-source circuit for lighting load using mobile everycircuit simulator

in #utopian-io7 years ago

Hi steemians, today I'll be making a tutorial using an application: Everycircuit.
For starters you can download it from playstore.
This mobile app is useful for simple circuit simulator for example for university lab experiment for checking results.
Screenshot_2017-12-25-14-57-46.png

Screenshot_2017-12-25-14-57-52.png

First create a new template for your desired circuit. Click the icon > Create new circuit

Screenshot_2017-12-25-15-29-04.png

then, click the AC Source at the upper indicator for our Alternating Current supply.

Screenshot_2017-12-25-15-03-09.png

to actualize the simulation, I changed the parameters to 220v, 60 Hz source. As it is the standard here in the Philippines.

Screenshot_2017-12-25-15-04-41.png

for the line resistances (the resistance of the wires), assuming it is 200 milli ohms or 0.02 ohms.
click > the resistor>> change it to your desired resistance.

Screenshot_2017-12-25-15-08-11.png

now, click a lighting load>change it to your desired voltage requirements>put it in a wye connection.

Screenshot_2017-12-25-15-08-46.png

Screenshot_2017-12-25-15-09-35.png

then, connect the wye load to the wye source and start the simulation.
to see the sinusoidal wave and the voltage generated by the three phase source, click the wire>highlight it.

Screenshot_2017-12-25-15-10-59.png

now the the current entering the load > click the load itself>then highlight it.
Screenshot_2017-12-25-15-11-29.png



Posted on Utopian.io - Rewarding Open Source Contributors

Sort:  

Your contribution cannot be approved because it does not refer to or relate to an open-source repository. See here for a definition of "open-source."

You can contact us on Discord.
[utopian-moderator]

Okay sir, I'll do it next time