Protego
7 September, 2017
Today, September 7th 2017, WikiLeaks publishes four secret documents from the Protego project of the CIA, along with 37 related documents (proprietary hardware/software manuals from Microchip Technology Inc.). The project was maintained between 2014 and 2015.
Protego is not the "usual" malware development project like all previous publications by WikiLeaks in the Vault7 series. Indeed there is no explicit indication why it is part of the project repositories of the CIA/EDG at all.
The Protego project is a PIC-based missile control system that was developed by Raytheon. The documents indicate that the system is installed on-board a Pratt & Whitney aircraft (PWA) equipped with missile launch systems (air-to-air and/or air-to-ground).
Protego consists of separate micro-controller units that exchange data and signals over encrypted and authenticated channels:
» On-board TWA are the 'Master Processor' (MP) and the 'Deployment Box'. Both systems are layed-out with master/slave redundancy.
» The missle system has micro-controllers for the missle itself ('Missle Smart Switch', MSS), the tube ('Tube Smart Switch', TSS) and the collar (which holds the missile before and at launch time).
The MP unit receives three signals from a beacon: 'In Border' (PWA is within the defined area of an operation), 'Valid GPS' (GPS signal available) and 'No End of Operational Period' (current time is within the defined timeframe for an operation). Missiles can only be launched if all signals received by MP are set to 'true'. Similary safeguards are in place to auto-destruct encryption and authentication keys for various scenarios (like 'leaving a target area of operation' or 'missing missle').
Copying/Pasting full texts is frowned upon by the community.
Some tips to share content and add value:
Repeated copy/paste posts could be considered spam. Spam is discouraged by the community, and may result in action from the cheetah bot.
Creative Commons: If you are posting content under a Creative Commons license, please attribute and link according to the specific license. If you are posting content under CC0 or Public Domain please consider noting that at the end of your post.
If you are actually the original author, please do reply to let us know!
Thank You!
Hi! I am a robot. I just upvoted you! I found similar content that readers might be interested in:
http://www.ginmemberforum.com/blog/
Your Post is nice thanks for sharing :)
I started following you .. please follow me back @Rabody so I can support you more.