Hive

Posts

frogmancosplay (42)in #cosplay • 6 years ago
Destiny 2 Hunter knife update
Here is a quick update on the Destiny 2 Hunter Knife project. This last week I was able to finish up the clay step for my two part mold. This involved putting everything to a…
$0.03
Past Payouts $0.03
- Author $0.02
- Curators $0.00
3 2
frogmancosplay (42)in #cosplay • 6 years ago
Destiny 2 Hunter knife update
So since the last post I have gotten the knife up to a 2,000 grit buffed mirror finish and let the whole thing cure for a week. As of right now I am currently claying up 1/2 of…
$2.81
Past Payouts $2.81
- Author $2.13
- Curators $0.69
102 1
frogmancosplay (42)in #cosplay • 6 years ago
Fair open class contest update!
So as I mentioned in my last post I entered my Rey's blaster and Rin's Katana into the open class contest at the fair. Well I ended up doing pretty good! I got a blue ribon for…
$0.14
Past Payouts $0.14
- Author $0.11
- Curators $0.03
4 0
frogmancosplay (42)in #cosplay • 6 years ago
Rey's blaster: Finished!
So after forever I finally got around to finishing my Star Wars Rey's blaster project. From the start I 3D printed it, did all of the body work, painted it, added screws, and…
$7.77
Past Payouts $7.77
- Author $5.89
- Curators $1.88
158 13
frogmancosplay (42)in #cosplay • 6 years ago
Destiny 2: Hunter knife build update
So far this week I have been doing a ton of primer, wet sanding, and spot filling. But at this point I am getting pretty close to a finished master ready to make a mold of. I…
$0.04
Past Payouts $0.04
- Author $0.03
- Curators $0.01
5 1
frogmancosplay (42)in #cosplay • 6 years ago
Destiny 2: Hunters knife build
Here is the latest project that I have been working on this past week. It is the Destiny 2 hunters knife. So far I have printed, filled, and primed it. Oh and done a TON of…
$0.06
Past Payouts $0.06
- Author $0.05
- Curators $0.01
5 4
frogmancosplay (42)in #printing • 7 years ago
How to make something using a 3D printer.
So I rely on my 3D printer to make a majority of my cosplay props for a variety of reasons. Mostly because it can do really nice detail, it's pretty quick, and I can design props…
$0.36
Past Payouts $0.36
- Author $0.29
- Curators $0.08
5 0
frogmancosplay (42)in #cosplay • 7 years ago
Mold and casting for the first time!
So this week I gave mold and casting a go for the first time! Figured it would be a good idea to practice molding before I do any bigger projects like the stave heads for my…
$0.56
Past Payouts $0.56
- Author $0.49
- Curators $0.07
4 4
frogmancosplay (42)in #cosplay • 7 years ago
Mystogan stave update
Today I was able to build up and assemble part of the stave I posted about yesterday. I went to the hardware store and picked up some supplies. 1 1/2inch dowel's a, few clamps…
$0.00
3 0
frogmancosplay (42)in #cosplay • 7 years ago
Mystogan cosplay
For Sakura-Con 2019 my new big cosplay will be Mystogan from Fairy Tail. This will be my cosplay contest costume and the first time doing a contest, so I will be going all out…
$0.25
Past Payouts $0.25
- Author $0.20
- Curators $0.05
5 2
frogmancosplay (42)in #cosplay • 7 years ago
Hammer commission
So this was a fun project! My fiend commissioned my to make a "like a Thor's hammer but not" prop for him. He had a greek type photo shoot he was doing and wanted to have a cool…
$0.00
3 4
frogmancosplay (42)in #cosplay • 7 years ago
Star Wars Blaster project update!
Here are some update photos of my Rey's blaster and Han Solo blaster projects!! Rey's blaster: It is like 90% done. I just need to go to the hardware store and get some screws…
$0.11
Past Payouts $0.11
- Author $0.09
- Curators $0.02
3 1
frogmancosplay (42)in #cosplay • 7 years ago
Star Wars space guns
I am currently working on making some Star Wars guns. Han Solo's blaster and Rey's blaster. They are for this May the 4th be with you event that I am DJing at. They are also…
$0.00
1 2
frogmancosplay (42)in #cosplay • 7 years ago
Blue Exorcist Cosplay Sword
Well here is my first 3D printed project and first post on here. I designed it using reference photos off of Amazon in Fusion 360. I then printed it on my Anycubic I3 mega at…
$0.00
1 0