I make it teacher give me project of half adder and full adder so i complete project tell this is fine or not
In this project we add two flip flops and get output in the form of sigma and c out we apply two inputs A and B and one c input.
I make it teacher give me project of half adder and full adder so i complete project tell this is fine or not
In this project we add two flip flops and get output in the form of sigma and c out we apply two inputs A and B and one c input.
nice
Try to explain more about the project... whats the task?
Awesome post
Do you have series resistors for the LEDs?
It looks like you did a good job with the breadboard, but I think the LEDs are too brights and you risk burning out, or over driving the IC.
If this is five volt logic, and considering the LEDs drops around 2V ...that leaves 3V for series resistance. These circuits work well at 10mA intensity. Following Ohm's Law use a 300 Ohm (330 is typical) resistor in series with the LED. You can use larger values, just do not use too much resistance or you will not see the light.
A little more in depth explanation would be nice for those of us who do not know what the project was about!
Thanks for sharing.