That feature on Brave Browser is off by default, though it will prompt you one time to enable it if the web browser notices that the number of tabs opened makes it occupy a huge portion of your device's RAM. 🤔🤓😏
!DIY
!PIZZA
You are viewing a single comment's thread from:
That's a reasonable default, and prompt behavior to enable. It seems very logical. I dig it. 😁🙏💚✨🤙
!DIY
!PIZZA
Maybe those users whose computers have at least 32 GB of RAM won't encounter such prompt on their web browser. 🤔😎🤓
!DIY
!STRIDE
Well, my laptop has 32GB of RAM, so I'm curious if I would see that prompt if I used Brave more regularly. 😁 🙏 💚 ✨ 🤙
!DIY
!STRIDE
Sounds like your laptop with 32 GB of RAM is not old enough, as the RAM on laptops are usually welded onto the motherboard and therefore cannot be upgraded (easily). 🤔🤯
Maybe open a whole lot of apps at the same time on your laptop so that your chances of seeing the prompt from the web browser are higher! 🤓😏
!DIY
!WINEX
It's a fairly recent, 2021, ASUS TUF F15. Soldered RAM is not really that common, as I've upgraded the RAM on a great many, both mine and those of others. I think it's in some of the lower-end models, but in my many years of working with computers, both desktops and laptops, I've never seen it.
I almost always have many apps open at any particular time, usually the same ones, and with a Qortal node running that can use 50% of my total RAM, and it does bog down a little sometimes. Yes, I'd also need to open lots of tabs in Brave, as because I rarely use it, it has maybe one or two opened. 😁 🙏 💚 ✨ 🤙
!BBH
!DIY
I didn't expect you to say that you upgrade the RAM of (the laptop) computers of other people, as well as you have already spent many years of working with (desktop and laptop) computers. 🤔🤯
Your #Qortal node using up about 50% of the free RAM (which is 16 GB) of your laptop sounds huge! 🤯 Renting a VPS for such purpose would practically be worth more than $15. 🤯💸😅
!WINEX
!LUV
!DIY
@tydynrain, @savvytester(3/10) sent you LUV. | tools | discord | community | HiveWiki | <>< daily
Hahaha...well, the topic didn't really come up, so I had no reason to mention it, but yeah, I've been a tech geek for many many years now.
Well, I can adjust how much RAM that it can use, but 50% was a percentage where my node does the best. It was 40%, but I still had issues, so I tested it at 50%, and it asas notably more stable. Perhaps, but as I've said, I like to have full control over my setup and system. 😁 🙏 💚 ✨ 🤙
!DIY
!LUV
!WINE
You can query your personal balance by
!DIYSTATSYou can query your personal balance by
!DIYSTATSYou can query your personal balance by
!DIYSTATSYou can query your personal balance by
!DIYSTATS(4/250)
@savvytester! @tydynrain Loves walking/running, and wants to motivate your stride as well! so I just sent 0.1 STR to your account on behalf of @tydynrain.
Keep your stride high!
You can query your personal balance by
!DIYSTATS(1/1)
@tydynrain! @savvytester Loves walking/running, and wants to motivate your stride as well! so I just sent 0.1 STR to your account on behalf of @savvytester.
Keep your stride high!
You can query your personal balance by
!DIYSTATSYou can query your personal balance by
!DIYSTATS