• wintermuteai (51)in #ai • 5 years ago

  Face Recognition with Micropython (K210 chip boards: Sipeed Maix series, M5StickV, HuskyLens)

  Hello and welcome to my channel, Hardware.ai! Today’s video is going to be a quick review of face recognition model and firmware for K210 chip, developed and published by…

  $0.00

   4 1
• wintermuteai (51)in #drone • 5 years ago

  Drone-building: Raspberry Pi Zero FPV Quadcopter with APM 2.8

  I had no experience building quadcopters before, but I built one all the same, just to show them. It crashed horribly. So I built a second one. That one crashed horribly. So I…

  $11.07

  • Past Payouts $11.07
  • - Author $5.56
  • - Curators $5.51

   539 7
• wintermuteai (51)in #ai • 5 years ago

  12th AGI Conference: OpenCog, Dr. Ben Goertzel and Dr. Nil Geisweiller

  Below is the video's script. Hello and welcome to my channel, Hardware.ai. This week I went to 12th AGI Conference here in Shenzhen, China. In this video I would like to make…

  $0.00

   2 0
• wintermuteai (51)in #ros • 5 years ago

  Compiling ROS Melodic on Raspberry Pi 4 ~ RPILIDAR, Xbox 360 Kinect Demos

  I suffered, so you wouldn't have to! The video, together with the article describes the process of compiling ROS Melodic from source on new Raspberry Pi 4. Also demos of using…

  $0.11

  • Past Payouts $0.11
  • - Author $0.09
  • - Curators $0.03

   5 2
• wintermuteai (51)in #ai • 5 years ago

  Nvidia Jetson Nano vs. Google Coral Dev board, Detailed Comparison

  Let the strongest win! In this video I compare hardware specs, official benchmarking results, my own benchmarking results and user experience for both boards.

  $0.00

   0 1
• wintermuteai (51)in #ai • 5 years ago

  PYNQ Z-2 FPGA Development board overview follow-up

  Here is a quick follow-up to my series of videos about PYNQ Z-2, an FPGA Development board. The main goal of this article is to provide a quick summary of the video for the…

  $0.01

  • Past Payouts $0.01
  • - Author $0.01
  • - Curators $0.00

   30 0
• wintermuteai (51)in #ai • 5 years ago

  Image Recognition With Sipeed MaiX and Arduino IDE/Micropython

  I already wrote one article on how to run OpenMV demos on Sipeed Maix Bit and also did a video of object detection demo with this board. One of the many questions people…

  $12.89

  • Past Payouts $12.89
  • - Author $9.71
  • - Curators $3.18

   1178 7
• wintermuteai (51)in #robotics • 6 years ago

  Jetson Nano Quadruped Robot Object Detection Tutorial

  Nvidia Jetson Nano is a developer kit, which consists of a SoM(System on Module) and a reference carrier board. It is primarily targeted for creating embedded systems that…

  $0.00

   3 1
• wintermuteai (51)in #ai • 6 years ago

  Jetson Nano detailed review follow-up

  Nvidia Jetson Nano is a developer kit, which consists of a SoM(System on Module) and a reference carrier board. It is primarily targeted for creating embedded systems that need…

  $0.00

   0 0
• wintermuteai (51)in #nvidia • 6 years ago

  Detailed review of Nvidia Jetson Nano

  Intro Hardware overview Software overview: Preparing for the first boot and examples

  $0.00

   1 0
• wintermuteai (51)in #ai • 6 years ago

  Sipeed MaiX Bit OpenMV Demos - Computer Vision

  This is the second article in series about Sipeed AI on the Edge microcontroller platform. This time I will be writing about MaiX Bit( link to Seeed Studio Shop ), a smaller…

  $0.00

   5 0
• wintermuteai (51)in #ai • 6 years ago

  AI Camera for Raspberry Pi/Arduino

  If you have been following the news recently, there was an explosion of start-ups developing chips for accelerating ML(machine learning) algorithms inference and training.…

  $0.03

  • Past Payouts $0.03
  • - Author $0.02
  • - Curators $0.01

   8 5
• wintermuteai (51)in #robotics • 6 years ago

  Computer Vision for ROS and Robotic Arms

  It has been a while since a published an update to my project. I started a new job as product manager for Seeed Studio/Chaiohuo Makers and moved to a new place. I was still…

  $0.00

   0 0
• wintermuteai (51)in #robotics • 6 years ago

  ROS MoveIt Robotic Arm Part 2 : Robot Controller

  In the previous part of the article we have  created URDF and XACRO files for our robotic arm and launched RVIZ to  control our robotic arm in simulated environment.This time…

  $0.23

  • Past Payouts $0.23
  • - Author $0.18
  • - Curators $0.05

   5 1
• wintermuteai (51)in #robot • 6 years ago

  ROS MoveIt Robotic Arm

  This is going to be a series of articles about  making a robotic arm controlled with ROS(Robotic Operating System) and  MoveIt. If you are into robotics ROS is a great framework…

  $0.27

  • Past Payouts $0.27
  • - Author $0.20
  • - Curators $0.06

   9 4
• wintermuteai (51)in #ros • 6 years ago

  ROS Robotic arm with MoveIt for motion planning

  This is a robotic arm with motion planning I made recently using ROS and MoveIt for motion planning. The arm itself is 3D printed, you can download STL files here. All credits…

  $0.00

   3 0
• wintermuteai (51)in #robotics • 6 years ago

  Banana/Raspberry Pi + Arduino Rover With Webcam

  A project I have done in my spare time. It is a  full-drive 4 wheel robot controlled through a web interface. If you  have any comments or questions please feel free to contact…

  $0.73

  • Past Payouts $0.73
  • - Author $0.57
  • - Curators $0.17

   25 3